Program Mode; Listening To Your Iphone/Ipod - Jensen JiSS-120i User Manual

Portable docking digital music system with cd for ipod and iphone
Table of Contents

Advertisement

Available languages

Available languages

PROGRAM MODE

1. In CD stop mode, press the PROGRAM button on unit. The
program indicator and first program location "01" will display and
flash.
2. Press the
For example, track 5 is selected, it will show in display steadily.
3. Press the PROGRAM button again to store this track in memory.
The LED display will go to "02" and blink to prompt for input.
4. Repeat the above procedures 2-3 until all desired tracks have
been stored. A total of 20 tracks can be stored in memory
for CD playback.
5. After you finish programming 20
tracks one by one in your program sequence and then return to show the first
programmed number "01" automatically and blink. The programmed tracks are ready
to play.
6. Press the
button once to start the program playback.
7. To cancel the programmed memory, press the
door during the stop mode. The Program Indicator will go off.
1. Push the docking door to open it and expose the docking connector.
2. Gently place the iPhone/iPod onto the connector. The Apple device will begin
charging automatically.
NOTE: 1.)Your iPod/iPhone will not charge in AM radio mode.
2.) Your iPod/iPhone will only charge when the unit is powered by the AC
adaptor. Your iPod/iPhone will not charge when the unit is powered by the
batteries.
3. Set the FUNCTION selector to the AUX/iPod position.
4. Press the
button to start playback.
5. Press the
6. In play or pause mode, press the
repeatedly to skip tracks. Press the
or press repeatedly to skip backward several tracks.
7. During play mode, when the
high speed audible search of the track, either forward or backward depending on
which button is pressed.
8. Adjust the VOLUME control to obtain the desired sound level from the built-in
speakers.
Note: The volume level cannot be adjusted using the volume control on your
iPod/iPhone after docking.
or
button to choose your desired musical track.

LISTENING TO YOUR iPhone/iPod

button to pause or resume play.
th
tracks, the display will show programmed
button to skip forward to the next track or
button to return to the beginning of the track,
or
button is pressed and held, the unit will do a
- EN 10 -
button twice or open the CD

Advertisement

Table of Contents
loading

Table of Contents