Listening To Your Iphone/Ipod - Jensen JIMS-125I User Manual

the "P01" indicator will show on the LCD. Preset channel number "01" is flashing.
5. Press the  or  button to select the preset number you want to assign the station
to.
6. Press the MEM.SET/CLK.ADJ. button to confirm the setting.
7. Repeat above steps 3-6 to store other stations.
RECALLING PRESET MEMORY CHANNELS
In radio mode, recall the pre-set channels by pressing the MEM+ button on main unit
repeatedly.
iPod Bracket
The JiMS-125i comes with a removable insert bracket for iPod Classic 160GB, but it
should also work with other models too. If the included adaptor does not fit your iPod,
you can still use the dock without an adaptor or use the original adaptor included with
your iPod instead by inserting it into the docking area.
Inserting the iPod Bracket
1. Gently press the iPod insert or your iPod Bracket into the dock if you are use an
iPod. No Bracket is required if you use an iPhone.
2. Carefully place your iPhone/iPod into the docking bay by placing the connector on
the bottom of the iPhone/iPod onto the connector in the docking bay.
NOTE: Remember to remove any bumper of iPhone 4 before inserting it into the
docking connector.
3. To remove/replace an Bracket, first remove your iPhone / iPod, then grip the
Bracket and pull gently upwards.
PLAYBACK
1. Press the POWER button to turn on the unit.
2. Press the FUNCTION button to select iPod mode, the iPod "
the LCD display and then press the PLAY/PAUSE
3. Press the PLAY/PAUSE
4. Press the VOLUME+ / - button to adjust your desired volume level
NOTE: The volume level cannot be adjusted by the volume control of your iPod after
being docked.
5. Press the  or  button to select the desire music track.
6. Press and hold the  or  button for fast-forwarding or fast-rewinding during
playback.
7. To remove the iPhone/iPod from the unit, press and hold the PLAY/PAUSE

LISTENING TO YOUR iPhone/iPod

button to pause or resume playback.
button to start playback.
4
" icon appears on