Setting Timer - Toshiba MMk-AP0094MH-E Owner's Manual

SMMS High-Wall Type
Timer operation
Use the wired remote controller for timer setting if it
is also in use.
ON timer and OFF timer
1
2
3
4

Setting TIMER

1
ON / OFF TIMER button
Push the ON or OFF TIMER buttons as required.
• The previous timer setting is displayed and flashes
along with ON / OFF timer display.
2
TIMER button
Push the TIMER
Set the timer to the desired time.
Each push of the TIMER button changes the time in
ten minute steps.
Pushing the TIMER button continually changes the
time in one hour step.
3
SET button
SET
Push the SET
The timer time is indicated and the timer starts.
Cancelling TIMER
4
CLR button
CLR
Push the CLR
19-EN
PRESET
START/STOP
FAN MODE AUTO
ECO Hi-POWER
SWING
TIMER
FIX MEMO
ON OFF SET CLR
FILTER
RESET CLOCK CHECK
button.
button to set the timer.
SET
button to cancel the timer setting.
CLR
CAUTION
• When the timer operation is selected, the
remote controller automatically transmits the
timer signal to the indoor unit at the specified
time. Therefore, keep the remote controller in a
location where it can transmit the signal to the
indoor unit properly. Otherwise, the time lag of
up to 15 minutes will occur.
• If the SET button is not pushed within 30
SET
seconds after setting the time, the setting will
be cancelled.
– 19 –
Owner's Manual