Adjusting Clock - Toshiba MMk-AP0094MH-E Owner's Manual

SMMS High-Wall Type
5.

Adjusting clock

Setting the clock
Before you start operating the air conditioner, set
the clock of the remote controller using the
procedures given in this section. The clock panel
on the remote controller will indicate the time
regardless of whether the air conditioner is in use or
not.
Initial setting
When batteries are inserted in the remote controller
the clock panel will indicate AM 0:00 and will flash.
FAN
SWING
FIX
ON
1
2
1
TIMER button
Push the TIMER button to set the current time.
Each push of the TIMER button changes the time in
one minute steps.
Pushing the TIMER button continually changes the
time in ten minute steps.
2
SET button
SET
Push the SET button.
SET
The current time is indicated and the clock starts.
PRESET
START/STOP
MODE AUTO
ECO Hi-POWER
TIMER
MEMO
OFF SET CLR
FILTER
RESET CLOCK CHECK
– 14 –
Clock adjusting
START/STOP
FAN MODE
SWING
TIMER
FIX
2 ON OFF
FILTER
3
FAN MODE
SWING
TIMER
FIX
ON OFF
FILTER
1
CLOCK button
Push the CLOCK button.
The CLOCK display flashes.
2
TIMER button
Push the TIMER button to set the current time.
Each push of the TIMER button changes the time by
one minute.
Pushing the TIMER button continually changes the
time by ten minutes.
3
SET button
SET
Push the SET button.
SET
The current time is indicated and the clock starts.
Owner's Manual
PRESET
AUTO
ECO Hi-POWER
MEMO
SET CLR
1
RESET CLOCK CHECK
AUTO
ECO Hi-POWER
MEMO
SET CLR
RESET CLOCK CHECK
EN
14-EN