High Power Operation - Toshiba MMk-AP0094MH-E Owner's Manual

SMMS High-Wall Type
Every day combined timer (setting both
ON and OFF timer simultaneously and
activate every day.)
This feature is useful when you want to use
combined timer at the same time every day.
▼ Setting combined TIMER
1. Push the ON
ON
2. Push the TIMER
3. Push the OFF
4. Push the TIMER
5. Push the SET
6. After step 5, an arrow mark (
about 3 seconds and during this flashing, push the
SET button.
SET
• During the every day timer is activating, both
arrows ( ,
Cancel the timer operation
Push the CLR
CLR
Clock display
During the TIMER operation (ON-OFF, OFF-ON,
OFF timer) clock display is disappeared so as to
show the setting time. To see the present time,
push SET button briefly and the present time is
displayed about 3 seconds.
21-EN
button.
button to adjust the ON timer.
button.
OFF
button to adjust the OFF timer.
button.
SET
or ) flashes for
) are indicated.
button.
A
PRESET
START/STOP
FAN MODE AUTO
SWING ECO Hi-POWER
TIMER
MEMO
FIX
ON OFF SET CLR
FILTER
RESET CLOCK CHECK

High power operation

High power (Hi POWER)
• The Hi POWER (high power operation) mode
automatically controls room temperature, airflow
and operation mode so that the room is quickly
cooled in summer and warmed in winter.
1
Setting Hi POWER mode
1
Hi POWER button
Push the Hi POWER button after starting any
operation. At the same time, the "Hi POWER" mark
on the remote controller is indicated.
Cancelling Hi POWER mode
1
Hi POWER button
Push the Hi POWER button once again.
At the same time, the "Hi POWER" mark on the
remote controller goes out.
CAUTION
• The Hi POWER mode cannot be activated in
the DRY and FAN ONLY operation and when
the ON TIMER operation is reserved.
• Hi POWER mode is not available for group
control.
When Hi POWER is transmitted to the Header
indoor unit, the receiving sound is heard but the
Hi POWER mode will not be performed. Please
cancel the Hi POWER mode.
– 21 –
Owner's Manual
A
PRESET
START/STOP
FAN MODE AUTO
SWING ECO Hi-POWER
TIMER
FIX MEMO
ON OFF SET CLR
FILTER
RESET CLOCK CHECK