Automatic Operation; Auto Changeover - Toshiba MMk-AP0094MH-E Owner's Manual

SMMS High-Wall Type

Automatic operation

This function is available only for use in
combination with a heat recovery model outdoor
unit. If this function is used with another model of
outdoor unit, "A" (Auto) appears on the remote
controller but the automatic operation is disabled.
Start
AUTO
1
FAN
SWING
FIX
ON
FILTER
1
AUTO button (AUTO)
Push AUTO button.
• The lamp (green) on the display panel of the
indoor unit lights.
The operation mode is selected in accordance
with the room temperature and operation starts
after approximately 3 minutes.
• If the AUTO mode is uncomfortable, you can
select the desired conditions manually.
Temperature, fan speed and louver position can
be changed.
When fan speed or louver position is changed,
MODE is also changed from AUTO to A.
At the same time, fan speed and louver
positioning indications are indicated.
Stop
START / STOP button
Push this button again to stop the air conditioner.
PRESET
START/STOP
MODE AUTO
ECO Hi-POWER
TIMER
MEMO
OFF SET CLR
RESET CLOCK CHECK
Automatic operation

(auto changeover)

Start
3
1
2
1
START / STOP button
Push this button to start the air conditioner.
2
Mode select button (MODE)
Select A.
3
Temperature button (
Set the desired temperature.
• The lamp (green) on the display panel of the
indoor unit lights.
The operation mode is selected in accordance
with the room temperature and operation starts
after approximately 3 minutes.
• When the A mode is selected, it is unnecessary
to set the fan speed.
The FAN speed display will show
fan speed will be automatically controlled.
• If the A mode is uncomfortable, you can select
the desired conditions manually.
Stop
START / STOP button
Push this button again to stop the air conditioner.
– 18 –
Owner's Manual
A
PRESET
START/STOP
FAN MODE AUTO
SWING ECO Hi-POWER
TIMER
FIX MEMO
ON OFF SET CLR
FILTER
RESET CLOCK CHECK
)
and the
EN
18-EN