Parts Name Of Remote Controller - Toshiba MMk-AP0094MH-E Owner's Manual

SMMS High-Wall Type
4.

Parts name of remote controller

Wireless remote controller and
its functions
4
2
5
FAN
6
SWING
7
9
ON
8
16
1
Infrared signal emitter
Transmits a signal to the indoor unit.
2
START / STOP button
Push the button to start operation.
(A receiving beep is heard.)
Push the button again to stop operation.
(A receiving beep is heard.)
If no receiving sound is heard from the indoor unit,
push the button twice.
3
Mode select button (MODE)
Push this button to select a mode.
Each time the button is pushed, a mode is selected in
a sequence that goes from A : Auto changeover
control, : Cool,
only, and back to A. (A receiving beep is heard.)
4
Temperature button (
.............. The set temperature is increased up to 30
°C.
.............. The set temperature is dropped down to
17 °C. (A receiving beep is heard.)
5
Fan speed button (FAN)
Push this button to select fan speed. When AUTO is
selected, the fan speed is automatically adjusted
according to the room temperature.
A desired fan speed can also be selected manually
from among five settings.
11-EN
1
AUTOA
A
B
PRESET
START/STOP
AUTO
MODE
ECO Hi-POWER
TIMER
MEMO
FIX
OFF SET CLR
FILTER
RESET CLOCK CHECK
: Dry, : Heat,
)
(LOW
+
MED
(A receiving beep is heard.)
6
Auto louver button (SWING)
Push this button to swing the louver.
(A receiving beep is heard.)
Push the SWING button to stop the louver swinging.
(A receiving beep is heard.)
7
Set louver button (FIX)
Push this button to adjust the air flow direction.
(A receiving beep is heard.) While this button is kept
depressed, the receiving tone continuously sounds.
8
Off timer button (OFF)
Push this button to set the OFF timer.
9
On timer button (ON)
17
Push this button to set the ON timer.
10
3 Reserve button (SET)
Push this button to reserve time settings.
14
(A receiving beep is heard.)
15
11
Cancel button (CLR)
12
Push this button to cancel ON timer and OFF timer.
13
(A receiving beep is heard.)
11
12
High power button (Hi POWER)
10
This function is not operated group control.
18
Push this button to start the high power operation.
13
Memory button (MEMO)
Push this button to stand by memorizing the settings.
Push the button again for more than 3 seconds to
memorize the setting indicated on the remote control
and mark is indicated.
14
Automatic operation button (AUTO)
Push this button to operate the air conditioner
automatically. (A receiving beep is heard.)
15
ECO timer button (ECO)
This function is not operated group control.
Push this button to start the ECO timer (OFF timer)
operation.
The OFF timer time can be selected from among four
: Fan
settings (1, 3, 5 or 9 hours).
16
FILTER button
This function is not used this unit.
17
PRESET button
Push this button to operate the air conditioner
according to settings memorized by the MEMO
button.
18
TIMER button
Use this button to change the clock, ON timer, and
OFF timer times.
To forward the time, push the "TIMER
To set back the time, push the "TIMER
– 11 –
Owner's Manual
+
, LOW , MED
, HIGH
,
)
" button.
" button.