Temporary Operation - Toshiba MMk-AP0094MH-E Owner's Manual

SMMS High-Wall Type
10.

Temporary operation

TEMPORARY operation
This function is used to operate the unit temporarily if the wireless remote controller is misplaced or its
batteries are exhausted.
• Push the TEMPORARY button once (less than 3 seconds) to start the air conditioner.
• The last operation conducted with the wireless remote controller will be performed. (When wireless
remote controller is not used, models with the auto-changeover (cooling / heating) function perform "A"
operation, and those without the function perform cooling operation (set temperature: 24 °C, fan: HIGH).)
I cannot find
the remote
control
CAUTION
Continuous pushing of the TEMPORARY button for 10 seconds and above will start the forced cooling
operation. (This will impose burden on the air conditioner. Do not perform this for the purposes other than
test run.) In this time all indicators of indoor unit go on.
A temporary
operation feature
is provided!
– 26 –
Owner's Manual
TEMPORARY button
EN
26-EN