Radio Operation - Jensen JiMS-185i User Manual

6. Press the ALARM 1
the or
volume level.
7. Press the ALARM 1
8. Repeat steps 1 to 7 using the ALARM 2 button when setting up ALARM 2.
Note: When "Wake to Radio" is selected, make sure the radio station you want
to wake to is tuned.
not docked, the Alarm source will be redirected to the Alarm
automatically when the alarm time is reached. If "Wake to Alarm" is
selected, the alarm will beep when the set Alarm time is reached.
9. If you want to turn off the alarm,
the main unit or remote and the
10. When the wake time is reached, the selected source, radio or iPod/iPhone
or Alarm will begin to play. The sound will starts playing softly and gradually
becomes louder until your preset volume level is reached.
continues to sound for 60 minutes if no button is pressed and the unit will
reset itself for the following day.
11. To stop the alarm after the preset time is reached and the source begins to
play, press the STANDBY
the alarm.
12. Or press the SNOOZE button on main unit or remote control, the alarm will
silence for nine minutes, the sound once again,
Note: The Snooze function can be used again repeatedly, but only within
one hour from the original wake time.
TUNING THE RADIO
1. Press and hold the STANDBY
button on remote control to turn on the unit. Press the FUNCTION
STANDBY
button on main unit or remote control repeatedly to select the RADIO mode.
The FM indicator will go on & the receiving frequency will appear on LED
Display.
2. To automatically scan to next available radio station, press and hold either
the or
seconds until the frequency readout on display begins to scan then release
the button. The tuner will stop on the first strong station signal it finds. The
frequency readout will revert to the current tine after about 5 seconds.
button on main unit or remote control to confirm, Press
buttons on main unit or remote control
button on main unit or remote control button to confirm.
If "Wake to iPod" is selected but an iPod or iPhone is
press the
Alarm1 or Alarm 2 indicator will go off.
button on main unit or remote control to stop

RADIO OPERATION

buttons on main unit or remote control for about 2
ALARM 1 or
button on the main unit or press the
12
to set the wake up
ALARM 2 buttons on
The alarm