Setting The Current Time Manually; Alarm Operations; Setting The Alarms - Jensen JiMS-185i User Manual

SETTING THE CURRENT TIME MANUALLY

1. With the unit in standby mode, press and hold the PRESET/TIME SET
button on the main unit or press the TIME SET button on remote control until
"12Hr" is blinking on the LED Display.
2. Press the
between 12 hour (12Hr) and 24 hour (24Hr) format. Press the
PRESET/TIME SET on the main unit or TIME SET button on remote control
again to confirm your time format selection.
3. The Hour digits will start to blink. Press the
or remote control to set the correct hour.
the main unit or TIME SET button on remote control again to confirm.
Note: Make sure the hour is set so that the AM or PM indicator is displayed
correctly.
4. The Minute digits will start to blink. Press the
unit or remote control to set the correct minute.
SET on the main unit or TIME SET button on remote control again to
confirm.
This unit provides two different wakeup times, ALARM1 and ALARM2. You
can choose to use them independently or simultaneously: ALARM1, ALARM2
or both ALARM1 and ALARM2.
SETTING THE ALARM(S)
Note:
‡ Alarm time(s) can only be set in Standby mode.
‡ When alarm time is reached the clock display & the alarm indicator will
blink together.
‡ Don't dock an iPod/iPhone onto the connector in the docking bay when
the Alarm is sounding .
1. Press and hold
ALARM 1 indicator will go on, then press
hour digits will blink.
2. When the hour digits are blinking, press the
unit or remote control to set the hour.
3. Press the ALARM 1 button on main unit or remote control to confirm, the
minute digits will now begin blinking.
4. When the minute digits are blinking, press the
unit or remote control
5. Press the ALARM 1 button
alarm time, a wake source
buttons on main unit or remote control to select the source you want to
wake to, FM Radio or iPod/iPhone.
or button on main unit or remote control to switch

ALARM OPERATIONS

the ALARM 1 button on main unit or remote control, the
to set the minutes.
on main unit or remote control
indicator will begin blinking. Press the
or
Press the PRESET/TIME SET on
or
Press the PRESET/TIME
the ALARM 1 button again the
or
or
11
button on main unit
buttons on main
buttons on main
buttons on main
to confirm the
or