Auxiliary Input; Sleep Timer - Jensen JiMS-185i User Manual

This unit provides an auxiliary audio signal input jack for connecting external
audio devices like MP3 players, CD players and older, non-dockable iPods
(except iPod shuffle 3
the speakers of this system.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end
of the cable.
2. Plug one end into the Aux-in jack of the main unit and the other end of the
cable into the Line-out Jack or Headphone Jack of your external audio
device.
3. Press and hold the STANDBY
STANDBY button on remote control to turn on the unit.
4. Press the FUNCTION button on the main unit or remote control repeatedly to
select AUX mode. The AUX/Alarm indicator will go on.
5. Turn on the external audio device.
6. The volume level can now be controlled through the main unit. Operate all
other functions on the auxiliary device as usual.
Note:
x If you are connected to the Line Out Jack of your external device then you
only need to adjust the volume control on this unit. If you are connected to the
Headphone Jack of your external device then you may need to adjust both
the volume controls of your external device and this unit to find the most
desirable volume setting.
x Press and hold the STANDBY
STANDBY button on remote control to turning off the unit when you finish
listening. Don't forget to switch off the power of your external device as well.
You can use the sleep timer to automatically turn off the unit when the selected
sleep duration has elapsed when in Radio, iPod/iPhone or AUX modes.
1. Turn the unit on and either dock your iPod/iPhone or tune to the desired
radio station.
2. Press the SLEEP button repeatedly to select the desired sleep time. The
sleep timer can be set for 90-10 minutes in 10 minute decremental steps.
The unit will stop and go into standby mode automatically when the selected
sleep duration has elapsed.
3. To cancel the sleep timer, press the SLEEP button on main unit or remote
control until timer shows "OFF".
4. To turn the unit off before the sleep time has elapsed, press STANDBY
button at any time.

AUXILIARY INPUT

rd
generation) and listen to your external source through
button on the main unit or press the

SLEEP TIMER

15
button on main unit or press the