Loading The Machine - Miele G 7856 Operating And Installation Instructions

Table of Contents

Advertisement

Loading the machine

Preparation
^ Empty all containers before loading
into the machine.
,
Ensure that no acid or solvent
residues, especially hydrochloric
acid or chlorides get into the wash
cabinet.
Notes
^ Load items so that water will come
into contact with all surfaces. This
ensures that they will be properly
cleaned.
^ Do not place items to be cleaned
inside other pieces where they may
be concealed.
^ Hollow vessels such as cups,
glasses, pots, etc. should be inverted
and placed in the correct inserts.
^ Deep based items should be placed
at an angle to ensure that water runs
freely off them.
^ Tall, narrow, hollow pieces should be
placed in the center of the basket to
ensure good coverage of water.
^ Small pieces should be placed on
the cup racks in the upper basket.
Do not obscure them by larger items
below. Cups should be on the lower
rack and bowls on the top rack so
that water reaches all pieces.
Loading the machine
^ The water duct for the spray arm in
the middle of the upper basket must
not be covered.
^ The spray arms must not be blocked
by items which are too tall or which
hang down in their path. If necessary,
manually rotate the arms to test.
Use the upper basket for:
^ small, lightweight, delicate items
such as cups, saucers, glasses,
dessert bowls etc. as well as for
lightweight thermally stable plastic
items.
Use the bottom basket for:
^ larger and heavier items such as
plates, serving platters, saucepans,
bowls etc. Glasses may only be
cleaned in the bottom basket if it is
fitted with a special glassware insert
or if there is a special bottom basket.
Cutlery
^ Unsorted cutlery should be placed in
the cutlery holders with the handles
facing downwards.
Select baskets and inserts which are
appropriate for the application
(available from Miele).
See examples on the following pages
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents