5.3
Adjusting/replacing telescopic front rigging support
1. Remove the two (2) mounting screws, spacers and locknuts that secure the telescopic front
rigging support to the seat frame.
2. Perform one (1) of the following:
•
Slide existing telescopic front rigging support to one (1) of three (3) depth positions.
•
Remove existing telescopic front rigging support and install NEW telescopic front rigging
support.
3. Secure telescopic front rigging at desired depth with existing two (2) mounting screws, spacers,
and locknuts. Securely tighten.
NOTE:
The two (2) telescopic front rigging supports can be positioned at different depths depending on
the need of the user.
38
Seat
Frame
Mounting
Screws
Spacers
Telescopic
Locknut
Front Tube