Adjusting Flip Back Armrests - Invacare XTERRA GT User Manual

6.2

Adjusting flip back armrests

WARNING
Make sure the flip back armrest release and
•
height adjustment levers are in the locked
position before using the wheelchair.
Positioning Flip Back Armrests for User Transfer
1. Unlock the flip back armrest by pulling the arm-
rest release lever into the HORIZONTAL position.
WARNING
• Armrest release lever must remain in the
horizontal position during transfer, otherwise
injury may result.
2. Pull up on the flip back armrest and remove the
armrest from the front arm socket.
3. Continue to pull up on the flip back armrest until
the armrest is out of the way.
4. Repeat STEPS 1-3 for opposite flip back armrest,
if necessary.
52
Flip Back
Armrest
Height
Adjustment
Lever
Front Arm
Socket
Locked
(VERTICAL)
Unlocked
(HORIZONTAL)
Armrest Release Lever
Locked
(VERTICAL)
Unlocked
(HORIZONTAL)