Invacare XTERRA GT User Manual page 37

70° Taper
1. Remove any accessory from the footrest(s).
2. Remove the footrest from the wheelchair. Refer to INSTALLING/REMOVING FOOTRESTS in this
procedure of the manual.
NOTE:
Lay the assembly on a flat surface to simplify this procedure.
Note the position of spacers before disassembly.
3. Remove the mounting screw and coved spacer that secures the lower footrest assembly.
4. Position the footrest assembly to the desired height.
5. Secure lower footrest assembly with existing mounting screw and coved spacer. Securely tighten.
NOTE:
Make sure spacers are positioned properly when reassembling so not to damage frame mounting
tubes.
6. Reinstall the footrest(s) onto the wheelchair. Refer to INSTALLING/
REMOVING FOOTRESTS in this procedure of the manual.
7. Reinstall any accessory onto the footrest(s).
37