Invacare XTERRA GT User Manual page 35

60°, 70°, 70° Taper
1. Turn the footrest to the side (open footplate is perpendicular to wheelchair itself).
2. Insert footrest mounting pin into mounting tube.
3. Push the footrest towards the inside of the wheelchair until it locks into place.
NOTE:
The footplate will be on the inside of the wheelchair when locked in place.
4. Repeat STEPS 1- 3 for the other footrest assembly.
5. To remove the footrest, push the footrest release lever inward, rotate footrest outward.
6. Refer to FOOTREST HEIGHT ADJUSTMENT in this procedure of the manual.
Footrest
Mounting Pin
Footrest
Mounting Tube
Release Lever
Footplate
35