Invacare XTERRA GT User Manual page 41

Adjusting
1. Remove the two (2) flat screws, washers and locknuts that secure articulating footplate to the
half clamp.
NOTE:
Observe the angle of the articulating footplate
for reinstallation.
2. Move articulating footplate to one (1) of four
(4) mounting positions.
NOTE:
If desired depth is still not obtained, rotate the
half clamp on the footplate hinge 180°.
3. Retighten the two (2) flat screws, washers
and locknuts.
NOTE:
The settings for positioning the articulating
footplates on the half-clamps may vary for each
footplate.
4. Refer to Adjustable Angle Flip-up Footplate
Angle Adjustment or Adjustable Angle Flip-up
Footplate Alignment and/or Angle Adjustment
in this procedure of the manual.
o
90 Footrest Support
Flat Screws
Articulating
Footplate
Half
Clamp
Washers
Locknuts
Footplate Hinge
Nylon
Adjustment
Screw
Footplate Hinge
Half Clamp
41