Adjustable Angle Flip-Up Footplate Alignment And/Or Angle Adjustment - Invacare XTERRA GT User Manual

5.7 Adjustable angle flip-up footplate alignment and/or angle
adjustment
NOTE:
It is not necessary to remove the footplate to
perform this adjustment.
1. Insert a flathead screwdriver through the half
clamp on the articulating footplate.
2. Slowly turn nylon adjustment screw in or out
until articulating footplate is aligned to the
footrest assembly or the desired angle is
obtained.
Footplate
Footrest Support
o
90 Footrest Support
Flat Screws
Articulating
Footplate
Half
Clamp
Washers
Locknuts
Footplate Hinge
Nylon
Adjustment
Screw
Footplate Hinge
Half Clamp
43