About This Guide; Related Intermec Manuals; Warranty Information - Intermec EasyCoder 3240 Getting Started Manual

About This Guide

Use this guide to get your printer up and running for the first time. This getting
started guide walks you through taking the printer out of the box, connecting it
to your system, and verifying that you have communications with your system.
Use this table to locate the information you need to get started.
For Information On
Preparing the printer for
connection
Connecting the printer
Optimizing print quality

Related Intermec Manuals

These manuals provide additional information about printing labels with your
3240 printer. To order a manual, call your local Intermec sales organization.
User's Manual
3240 Bar Code Label Printer User's Manual
General Reference
Data Communications Reference Manual
The Bar Code Book by Roger C. Palmer
IPL Programming Reference Manual

Warranty Information

To receive a copy of the standard warranty provision for this product, contact
your local Intermec sales organization. In the U.S. call (800) 755-5505, and in
Canada call (800) 688-7043. Otherwise, refer to the Worldwide Sales & Service
list that comes with this guide for the address and telephone number of your
Intermec sales organization.
C o d e 39
NugFont
HelvC
Refer To
Chapter 1. This chapter explains how to unpack the
printer, understand the printer front panel, plug in the
printer, load media, load ribbon, and print a test label.
Chapter 2. This chapter explains how to connect the
printer to your system, configure the serial port, and
verify that you have established communications.
Chapter 3. This chapter explains how to troubleshoot
basic print quality problems and perform procedures to
maintain print quality.
About This Guide
Intermec Part No.
063015
044737
051241
066396
v