Chapter 2 Front Panel Operations
Display Mode
DP800A series power supply supports the following display modes. The default is
normal display mode.
DP831A/DP832A: normal, waveform, dial, classic
DP821A/DP811A: normal, waveform, dial
Press Display Disp Mode to set the display mode to "Normal", "Waveform",
"Dial" or "Classic". The default is normal display mode. This setting is stored in the
non-volatile memory and will not be affected by factory reset.
Normal: display the voltage, current and power values of all the channels in
number form.
Waveform: display the voltage, current and power values of the channel
currently selected in waveform and number forms.
Dial: display the voltage, current and power values of the channel currently
selected in dial and number forms.
Classic: display the voltage, current and power values of all the channels in
number (classic) form.
Tip
For DP831A/DP832A, when the current display mode is "Normal",
"Waveform" or "Classic", press
between the current display mode and dial display mode.
For DP821A/DP811A, when the current display mode is "Normal" or
"Waveform", press
current display mode and dial display mode.
DP800A User's Guide
at the front panel to quickly switch
at the front panel to quickly switch between the
RIGOL
2-43