Display Setting; Brightness; Contrast; Rgb Luminance - Rigol DP800A Series User Manual

RIGOL
Chapter 2 Front Panel Operations

Display Setting

Press Display at the front panel to enter the interface as shown in the figure below.
You can set the screen brightness, contrast, RGB luminance and display mode.
Besides, you can also define the start-up interface.
Figure 2-8 Display Setting Interface

Brightness

Press Display  Brightness and use the knob or left/right direction key or numeric
keyboard to set the brightness of the screen. The range is from 1% to 100% and the
default is 50%. This setting is stored in the non-volatile memory and will not be
affected by factory reset.

Contrast

Press Display  Contrast and use the knob or left/right direction key or numeric
keyboard to set the contrast of the screen. The range is from 1% to 100% and the
default is 25%. This setting is stored in the non-volatile memory and will not be
affected by factory reset.

RGB Luminance

Press Display  RGB Lum and use the knob or left/right direction key or numeric
keyboard to set the RGB luminance of the screen. The range is from 1% to 100%
and the default is 50%. This setting is stored in the non-volatile memory and will not
be affected by factory reset.
2-42 DP800A User's Guide