Communicating Using Ipv6; Tcp/Ip Setting - Konica Minolta magicolor 8650 User Manual

PageScope Web Connection
9.16

Communicating using IPv6

Specifying settings for IPv6-based communication
To allocate the IPv6 address to this machine, use this setting. IPv6 can run simultaneously with IPv4.
However, Ipv6 does not run independently.
When using this machine under the IPv6 environment, there are the following restrictions.
- SMB Print and NTLM Authentication are not available.
- PageScope NDPS Gateway cannot be used.
- DHCPv6 cannot be used.
- IP filtering is not available.
- The printer driver installer cannot be used.
- PageScope Web Connection cannot be displayed with Flash.
Note
For details on direct hosting service, refer to "Direct Hosting Setting" on page 2-10.

TCP/IP Setting

In Administrator mode of PageScope Web Connection, select the Network tab - "TCP/IP Setting" - "TCP/IP
Setting".
8650
9
9-58