Member's Mark 720-0830F Assembly & Operating Instructions page 13

5. Flame Tamer, Cooking Grid, and Warming
Rack Assembly
a) Place Flame Tamer (G) over burners as shown,
and ends insert into channels on front and back of
firebox. See Fig.9.
b) Evenly space cooking grids (I) on the ledge above
Flame Tamer. See Fig.9.
To obtain Searing marks in cooked meat, be sure to
insert grids so that side with four corner feet faces
down.
c) Insert legs of warming rack (H) into the holes in
the top of firebox side panels. See Fig.9.
d) Insert grease cup (E) into grease tray from the
rear of the grill. See Fig.9.
6. Propane Gas Tank Assembly 6. Propane Gas Tank Assembly
To release the tank tray glides, slide the bracket up
90 degrees. See Fig.10.
To lock tank tray glides, slide the bracket to the left
90 degrees. See Fig.10.
Pull out of tank tray seat, place tank into the hole
in bottom panel. Use the tank bolt to secure the tank
in a fixed position, turn locker to right. See Fig.11.
Assembly Instructions
Fig.9
G
Fig.10
Fig.11
13
I
E
H