Adjusting The Position - American Dynamics Illustra 1MP User Manual

2.2.5 Adjusting the Position

The unit has three axes for positioning. While monitoring, adjust the position as below.

Pan Adjustment (A): For Wall Mount and Tilted Ceilings Rotate the lens base (maximum 350°) until you
are satisfied with the field of view.

Horizontal Rotation (B): Rotate 3D assembly in the base. Do not turn assembly more than 350° as this
assembly may cause the internal cables to twist and disconnect or break.

Tilt Adjustment (C): After loosening the thumbnuts, position the camera as desired, then finger―
tighten the thumbnuts to set the position.
Caution Limitation for three axes position:

Pan range: ±175°

Tilt range: 15°～ 90°

Rotate range: Manual Lens ±180° / Motorize Lens ±175°
F 2-4: A
IGURE DJUSTING THE
14
Illustra Flex 1MP & 3MP Indoor Dome
(D)
(E)
P
OSITION
(A)
(B)
(C)