American Dynamics Illustra 1MP User Manual page 37

3.2.2.1 FTP
In this page, users can activate a FTP Server to reach SD card for recordings.

Simply click "OFF" to disable the FTP function.

Simply click "ON" to activate the FTP function, and follow the following procedures to set up related
settings.

Enter a login ID if activated the FTP function.

Enter a password associated with the login ID.

Re-enter the password to confirm it.

Determine the number of maximum connections by key-in a number in the Max Simultaneous
Connections field. Note: This is the maximum of FTP Client connections, not the maximum of IE
Window's connections.
To log on the FTP, simply enter ftp://<Login ID>:<Password>@<ip address> in the location field of Microsoft's
Internet Explorer and the recordings will be shown up. The default setting
is ftp://admin:admin@192.168.1.168. Refer to the names of file and the folder for date and time of
recordings.
Note Please click "Save" button to save your settings. Users can also click "Reset to Default" to set
all the data and options back to defaults.
3.2.2.2 RTSP
To enable RTSP, simply enter the Login ID, Password, and Multicast Address, and then select "ON" in
Authentication.
F 3-24: FTP S
IGURE
F 3-25: RTSP & A
IGURE
37
ETTINGS
S
UTHENTICATION ETTINGS
Illustra Flex 1MP & 3MP Indoor Dome