Adjusting The Back Focus - American Dynamics ADCTDN0230P Instructions Manual

ADCTDN2412N_P_EN.book Page 26 Friday, September 28, 2007 12:49 PM
Setup

Adjusting the back focus

This camera is adjusted to a optimum wide range for CS-mount lens before
shipment but readjustment is required when using zoom lens or C-mount lens
or when the lens focus ring is out of focus. Use the following methods to adjust
the back focus.
Back focus adjustment ring
Tighten
Loosen
Back focus locking screw (M2.6)
Lens focus ring
26