American Dynamics Illustra 1MP User Manual page 13

Warning Depending on the material of your mounting surface, you may require different screws and
anchors than those as supplied. To prevent the unit from falling off, ensure that it is secured to
a firm place (ceiling slab or channel) with a safety wire (not supplied) strong enough to sustain
the total weight of the unit. (Pay also attention to the finishing at the end of the wire.) Never
turn the lens more than 360°, which should disconnect or break internal cables.
Safety wire must be connected with one end to the ceiling and the other to the safety-cord
Caution
screw of the unit.
F 2-3: M
IGURE OUNTING THE
13
Illustra Flex 1MP & 3MP Indoor Dome
C 2/2
AMERA