Panasonic KX-UT113 Operating Instructions Manual page 51

Setting
Enable VLAN
IP Phone
VLAN ID
Priority
PC (KX-UT123/
KX-UT133/KX-UT136/
KX-UT248 only)
VLAN ID
Priority
Speed/Duplex
LAN port
*2
PC port (KX-UT123/
*2
KX-UT133/KX-UT136/
KX-UT248 only)
Embedded web
*3
Authentication
ID
Password
Press [ ] and [ ] to switch between these items.
*1
The KX-UT248 supports Gigabit Ethernet. When connecting to a network that supports Gigabit Ethernet, select "Auto". For details,
*2
consult your administrator or dealer.
*3 This setting is not available if KX-UT113/KX-UT123/KX-UT133/KX-UT136 is connected to a KX-NS1000 PBX.
*4 LLDP: Link Layer Discovery Protocol, MED: Media Endpoint Discovery
*5 After these settings are changed, the phone will reboot automatically.
Document Version 2013-03
Description
Select whether to enable the VLAN
functionality.
Specify the necessary settings for
using the phone features over a
VLAN.
Specify the VLAN ID.
Specify the priority of packets sent
from this unit.
Specify the necessary settings for
using a PC over a VLAN.
Specify the VLAN ID.
Specify the priority of packets sent
from this unit.
Select the connection mode
(combination of link speed and
duplex mode) of the LAN port and PC
port.
Select the connection mode of the
LAN port.
Select the connection mode of the
PC port.
Enable or disable Web User
Interface Programming.
Configure the HTTP authentication
ID and password
*5
Enter the authentication ID.
Enter the authentication password.
Customising the Telephone
Value Range
Yes, No
—
1–4094
0–7
—
1–4094
0–7
—
Auto, 10M-Full,
10M-Half,
100M-Full,
100M-Half
Auto, 10M-Full,
10M-Half,
100M-Full,
100M-Half
On, Off
—
Max 64 characters
*6
Max 64 characters
*6
Operating Instructions
Default
No
—
2
7
—
1
0
—
Auto
Auto
Off
—
Not stored.
Not stored.
51