Feature Operations
Rejecting specific calls
You can set the unit to reject specific phone numbers.
Note
•
Rejected phone numbers will not be stored in
the incoming or missed call log.
Adding a phone number
You can store a maximum of 30 phone numbers you
want to reject in the rejection list of the unit.
1.
In stand-by mode, press
2.
Press [ ] or [ ] to select "Call Block", and then
press [ENTER].
3.
Press
.
Add
4.
Enter the telephone number (max. 32 digits), and
then press [ENTER].
Note
•
To register additional telephone numbers,
repeat the procedure from step 3.
Adding a phone number from the incoming or
missed call log
You can add a phone number by referring to the
incoming or missed call log.
1.
In stand-by mode, press
2.
Press [ ] or [ ] to select "Incoming Call Log"
or "Missed Call", and then press [ENTER].
3.
Press [ ] or [ ] to select the entry with the phone
number you want to reject.
4.
Press
.
Save
5.
Press [ ] or [ ] to select "Call Block", and then
press [ENTER].
6.
Press [ ] or [ ] to select "Yes", and then press
[ENTER].
Note
•
If you do not press any buttons for 1 minute, the
unit will return to stand-by mode.
Editing a stored phone number
1.
In stand-by mode, press
2.
Press [ ] or [ ] to select "Call Block", and then
press [ENTER].
3.
Press [ ] or [ ] to select the phone number you
want to edit, and then press
4.
Edit the phone number as necessary, and then
press [ENTER].
32
Operating Instructions
.
Setting
.
Call Log
.
Setting
.
Edit
Note
•
If you do not press any buttons for 1 minute, the
unit will return to stand-by mode.
Deleting a stored phone number
1.
In stand-by mode, press
2.
Press [ ] or [ ] to select "Call Block", and then
press [ENTER].
3.
Press [ ] or [ ] to select the phone number you
want to delete, and then press
4.
Press [ ] or [ ] to select "Yes", and then press
[ENTER].
Note
•
If you do not press any buttons for 1 minute, the
unit will return to stand-by mode.
.
Setting
.
Delete
Document Version 2013-03