Advertisement
TEST OPERATION
1
Adjust the air pressure at 5 bar (70 p.s.i.) and connect the
air supply.
2
Without touching the trigger, depress the staple discharge
outlet against the work-piece.
Pull the trigger. (The tool must fire the fastener.)
3
Adjust the air pressure as much as the lowest possible ac-
cording the length of fastener and the hardness of work-
piece.
AIR HOSE CONNECTION
Connect the air chuck to the air plug.
WARNING
When connecting the air chuck, do not point the staple dis-
charge outlet at any part of your body or at another preson,
and do not touch the trigger.
DRIVING FASTENERS
1
Outlet
1
Depress the staple discharge outlet against a place where
you want to drive a staple.
2
Pull the trigger.
2
Trigger
CLEARING JAMMED STAPLES
Slider Unit
1
Disconnect the air hose.
2
Remove the set of staples from the magazine.
3
Take out the 4 hexagon socket head cap screws from the
magazine and remove the driver guide cover.
4
Clear the staples jammed inside the nose using a thin iron
bar or a flat-blade screwdriver.
5
Reinstall the driver guide cover, reinsert the set of staples
and bring back the slider unit.
WARNING
ALWAYS disconnect air supply before clearing jammed fas-
tener.
8
Flat-blade
screwdriver
Driver
Guide
Cover
Advertisement
