Download Print this page

Instructions For Operation - Max TA116/21-13 Operating And Maintenance Manual

Fine wire stapler

Advertisement

NOTE:
A filter will help to get the best performance and minimum wear
from the tool because dirt and water in the air supply are major
causes of wear in the tool.
Frequent, but not excessive, lubrication is required for the best
performance. Oil added thru the air line connection will lubricate
the internal parts.
4. INSTRUCTIONS FOR OPERA-
TION
Read section titled "SAFETY INSTRUCTIONS".
1.
BEFORE OPERATION
Check the following prior operation.
1
Wear Safety Glasses or Goggles.
2
Do not connect the air supply.
3
Inspect screw tightness.
4
Check operation of the trigger if moving smoothly.
5
Connect the air supply.
6
Check the air-leakage. (The Tool must not have the air-
leakage.)
7
Disconnect the air supply.
WARNING
2.
OPERATION
Wear safety glasses or goggles. Danger to the eyes always ex-
ists due to the possibility of dust being blown up by the exhausted
air or of a fastener flying up due to the improper handling of the
tool. For these reasons, safety glasses or goggles shall always
be worn when operating the tool.
The employer and/or user must ensure that proper eye protection
is worn. Eye protection equipment must conform to the require-
ments of Council Directive 89/686/EEC of 21 DEC. 1989 (the
American National Standards Institute, ANSI Z87.1) and provide
both frontal and side protection.
The employer is responsible to enforce the use of eye protection
equipment by the tool operator and all other personnel in the work
area.
NOTE: Non-side shielded spectacles and face shields alone do
not provide adequate protection.
WARNING
Keep hands and body away from the discharge outlet when driv-
ing the fasteners because of dangerous of hitting the hands or
body by mistake.
STAPLE LOADING
Slider Unit
2
1
Remove the click lever.
2
Pull out the slider unit.
A set of staples
(Insert it with the square
feet of staples up)
Magazine
3
Insert a set of staples into the magazine with the square feet
of staples up.
Slider Unit
4
Press the slider unit to set the click lever securely.
7
Click Lever
1
Click Lever

Advertisement

loading

This manual is also suitable for:

Ta116/22-9Ta116/22-9(ce)Ta116/21-13(ce)