Codabar Settings - IBC DCX Series User Manual

Codabar Settings

X008 e c t s d ll x i p s
e
1 = enable codabar; 0 = disable codabar
c
1 = enable check digit; 0 = disable check digit checking
t
1 = include check digit with data; 0 = don't include
s
1 = include start/stop characters with data; 0 = don't include
d
1 = include direction indicator; 0 = don't include
ll
read only codabar barcodes of length ll. Set ll to 00 for any length.
x
extra bars setting, 0 thru 4
i
1=enable clsi mode; 0=disable clsi mode
p
1 = codabar prefix on; 0 = don't include a prefix
s
1 = codabar suffix on; 0 = don't include suffix
NOTES
•
If the direction indicator is turned on, then the codabar data is prefixed with a "f" to indicate that the card was read in a
forward direction, "r" to indicate it was read in the reverse direction.
•
If the codabar barcode has extra bars in it, before or after the barcode, you can set the extra bars parameter to the number
of allowable extra bars. The reader will ignore the extra bars and "find" the codabar barcode within the bars.
•
If you set the prefix or suffix on, the any prefix that you program for codabar will be prepended to the codabar data, and any
suffix that you program will be appended to the codabar data.
•
If clsi mode is on, then codabar barcodes in clsi format will be convereted.
Codabar Prefix
X022 aaa bbb ccc ddd eee
aaa-eee 3-digit ascii value for a character, max=126, 000=end
You can program up to 5 characters to be prepended to ind2of5 data. To set a character use the 3-digit decimal value for the
character, i.e. "A" = hex 41 = 065 decimal. Use 000 to signify the end of the prefix data.
Example:
X022049050000000000
Inserts a prefix of "12" in front of the codabar data.
DCX Series User's Guide
Version 2.11 Rev. 0 13 August 2013
25