Get Time Command - IBC DCX Series User Manual

Get Time Command

t
returns: YY MM DD HH MM SS
This command returns the current date and time set in the reader.
Get Number of Records
z
returns: aaaaa bbbbb ccccc
aaaaa
number of total slots available in the reader for storage
bbbbb
number of used slots
ccccc
number of slots used but not uploaded
Returns the number of available slots for storage, the number of slots used, and the number of stored data records which have
not been uploaded.
Set Reader ID
g xxxxx -or - X109 xxxxx
Sets the reader id field to xxxxx. 5 characters are required. If less than 5 characters, pad with blanks. The g command is used
for backward compatibility with older IBC utility software. The preferred method to setting the ID is to use the X109 command.
Set Reader Description
h xxxxxxxxxx -or- X110 xxxxxxxxxx
Sets the reader id field to xxxxx 10 characters are required. If less than 10 characters, pad with blanks. The h command is used
for backward compatibility with older IBC utility software. The preferred method to setting the Description is to use the X110
command.
DCX Series User's Guide
Version 2.11 Rev. 0 13 August 2013
7