Table of Contents
Advertisement
Industrial 2 of 5 Barcode Settings
X003 e c t d ll x p s
e
1 = enable ind2of5; 0 = disable ind20f5 reading
c
1 = enable ind2of5 check digit; 0 = disable check digit checking
t
1 = include check digit with data; 0 = don't include
d
1 = include direction indicator; 0 = don't include
ll
read ind2of5 barcodes only with a length of 11; set ll to 00 to read any length
x
extra bars setting, 0 thru 4
p
1 = ind2of5 prefix on; 0 = don't include a prefix
s
1 = ind2of5 suffix on; 0 = don't include suffix
NOTES
•
If the direction indicator is turned on, then the ind2of5 data is prefixed with a "f" to indicate that the card was read in
a forward direction, "r" to indicate it was read in the reverse direction.
•
If the ind2of5 barcode has extra bars in it, before or after the barcode, you can set the extra bars parameter to the number
of allowable extra bars. The reader will ignore the extra bars and "find" the ind2of5
•
If you set the prefix or suffix on, the any prefix that you program for ind2of5 will be prepended to the ind2of5 data,
and any suffix that you program will be appended to the ind2of5 data.
Industrial 2 of 5 Prefix
X030 aaa bbb ccc ddd eee
aaa-eee 3-digit ascii value for a character, max=126, 000=end
You can program up to 5 characters to be prepended to ind2of5 data. To set a character use the 3-digit decimal value for the
character, i.e. "A" = hex 41 = 065 decimal. Use 000 to signify the end of the prefix data.
Example:
X030049050000000000
Inserts a prefix of "12" in front of ind2of5 data.
DCX Series User's Guide
Version 2.11 Rev. 0
13 August 2013
barcode within the bars.
15
Advertisement
Table of Contents
