IBC DCX Series User Manual page 13

Standard 2 of 5 Barcode Settings
X002 e c t d ll x p s
e
1 = enable S2of5; 0 = disable S20f5 reading
c
1 = enable S2of5 check digit; 0 = disable check digit checking
t
1 = include check digit with data; 0 = don't include
d
1 = include direction indicator; 0 = don't include
ll
read S2of5 barcodes only with a length of 11; set ll to 00 to read any length
x
extra bars setting, 0 thru 4
p
1 = S2of5 prefix on; 0 = don't include a prefix
s
1 = S2of5 suffix on; 0 = don't include suffix
NOTES
• If the direction indicator is turned on, then the S2of5 data is prefixed with a "f" to indicate that the card was read in
a forward direction, "r" to indicate it was read in the reverse direction.
• If the S2of5 barcode has extra bars in it, before or after the barcode, you can set the extra bars parameter to the number
of allowable extra bars. The reader will ignore the extra bars and "find" the S2of5 barcode within the bars.
• If you set the prefix or suffix on, the any prefix that you program for S2of5 will be prepended to the S2of5 data, and
any suffix that you program will be appended to the S2of5 data.
S2of5 Prefix
X020 aaa bbb ccc ddd eee
aaa-eee 3-digit ascii value for a character, max=126, 000=end
You can program up to 5 characters to be prepended to S2of5 data. To set a character use the 3-digit decimal value for the
character, i.e. "A" = hex 41 = 065 decimal. Use 000 to signify the end of the prefix data.
Example:
X020049050000000000
Inserts a prefix of "12" in front of S2of5 data.
DCX Series User's Guide
Version 2.11 Rev. 0 13 August 2013
13