Table of Contents
Advertisement
USID Card Options (21 Character Cards)
X104 1 2 3 4 5 6 7 8
1
Active personnel
2
Retired
3
Reserve
4
Sponsor
5
Dependent
6
Civilian
7
Retired Reserve
8
Dependent data type
NOTES
•
Each of the parameters above allow you to selectively turn on or off processing of specific usid cards. If the option is turned
off, then the card data is left untouched and the pdi is not extracted.
•
Note that this command affects on 21 character usid cards. The older 24 character cards are not supported at this time.
18 character usid and cac cards are selected using the X105 command.
•
Note that for 21 and 18 character usid cards to the processed, the option must be set in the X037 command.
USID and CAC Card Options (18 Character Cards)
X105 1 2 3 4
1
Accept all cards (except dependents)
2
Accept Dependents
3
Datatype (non dependent)
4
Datatype (dependents)
NOTES
•
To convert non dependent usid18 and cac cards to either the pdi or edi number, option 1 must be turned on (1).
To also accept dependent's cards, turn on option 2.
•
For non-dependent cards, either the pdi or edi can be used. Dependent cards contain only the edi or the sponsor or of the
dependent. Either one can be selected with option 4.
•
Note that for 21 and 18 character CAC cards to the processed, the option must be set in the X037 command.
DCX Series User's Guide
Version 2.11 Rev. 0
1=on, 0=off
1=on, 0=off
1=on, 0=off
1=on, 0=off
1=on, 0=off
1=on, 0=off
1=on, 0=off
0=dependent's pdi, 1=sponsor's pdi
1=on, 0=off
1=on, 0=off
1=edi, 0=pdi
1=Sponsor's edi, 0=dependent's edi
13 August 2013
41
Advertisement
Table of Contents
