Table of Contents
Advertisement
Restart Reader
<null> X
Restarts the reader. Changing some parameters, such as the baud rate, requires the reader to be powered down and then
restarted. Alternatively, you can issue the restart command to restart the reader.
<null> refers to the null character (hex 00)
Reset Reader
<null> U
Restarts the reader. Changing some parameters, such as the baud rate, requires the reader to be powered down and then
restarted. Alternatively, you can issue the restart command to restart the reader.
<null> refers to the null character (hex 00)
DCX Series User's Guide
Version 2.11 Rev. 0
13 August 2013
10
Advertisement
Table of Contents
