IBC DCX Series User Manual page 11

Code 39 Barcode Settings
X001 e c t s d ll x p s
e
1 = enable code39; 0 = disable code39 reading
c
1 = enable code39 check digit; 0 = disable check digit checking
t
1 = include check digit with data; 0 = don't include
s
1 = include start/stop characters with data; 0 = don't include
d
1 = include direction indicator; 0 = don't include
ll
read code39 barcodes only with a length of 11; set ll to 00 to read any length
x
extra bars setting, 0 thru 4
p
1 = code39 prefix on; 0 = don't include a prefix
s
1 = code39 suffix on; 0 = don't include suffix
NOTES
•
If the direction indicator is turned on, then the code39 data is prefixed with a "f" to indicate that the card was read in
a forward direction, "r" to indicate it was read in the reverse direction.
•
If the code39 barcode has extra bars in it, before or after the barcode, you can set the extra bars parameter to the number
of allowable extra bars. The reader will ignore the extra bars and "find" the code39 barcode within the bars.
•
If you set the prefix or suffix on, the any prefix that you program for code39 will be prepended to the code39 data, and
any suffix that you program will be appended to the code39 data.
•
If you are reading code39 from cac or usid cards, set the prefix,suffix,direction, and check digits off.
Code 39 Prefix
X016 aaa bbb ccc ddd eee
aaa-eee 3-digit ascii value for a character, max=126, 000=end
You can program up to 5 characters to be prepended to code39 data. To set a character use the 3-digit decimal value for the
character, i.e. "A" = hex 41 = 065 decimal. Use 000 to signify the end of the prefix data.
Example:
X016049050000000000
Inserts a prefix of "12" in front of code39 data.
DCX Series User's Guide
Version 2.11 Rev. 0 13 August 2013
11