Team Losi XXX-S Graphite Owner's Manual page 24

Step E-11
Battery Post Install
q
1. Install the Battery Strap Posts (136) to the Chassis (27), as shown, by placing the square base of the Post in the countersunk pockets on
the drivers right side of the Chassis.
q
2. Thread a 4-40 x 3/8" Cap Head Screw (30) through the bottom of the Chassis into each of the Battery Mounting Posts and tighten.
q
3. Peel the backing off of the Chassis Tape for the Battery (158) and align the cut-outs in the tape with the appropriate places on the Chassis
and apply the Tape to the Chassis as indicated in Figure 49.
BAG E (Continued)
158
30
Figure 49
APPLY CHASSIS
TAPE (158) HERE
136
21
27
30