Step 10 -Configure The Scanner - Microscan MS-3 Quick Start Manual

Step 10 —Configure the Scanner
By ESP
To change scanner settings, or to access the Utilities or Terminal
windows, click the App Mode button.
To return to the Setup Mode, click the Setup Mode button.
By Serial Command
From your terminal program or the Terminal screen in ESP, you can
enter serial commands and configuration and utility commands.
Note: You can learn the current setting of any parameter by inserting
a question mark after the number, as in <K100?>. To see all K
commands, send <K?>.
12
MS-3 Laser Scanner Quick Start Guide