Specification - SignaMax 065 Series User Manual

Signamax 㤠065
Specifications
Standards: IEEE 802.3u (100BaseFX Fast Ethernet);
Ports: 1x duplex fiber; ST Multimode (065-1163FST)
1x duplex fiber; SC Multimode (065-1163FSC)
1x duplex fiber; SC Singlemode (065-1163FSM)
1x 9-pin serial connector; D-sub, female
Data Rates: Fiber: 100 Mbps
Max. Distance: Copper: 1,200 meters (RS -422, RS-485;
Signals: RS-232:
RS-422:
RS-485:
Configuration: Parity: None, even, odd
Switches: DIP 1 – Enables / disables console /
-1163 F series RS-232/422/485 to 100BaseFX Media Converter
EIA/TIA RS-232E; EIA/TIA-574
Serial: 50 ~ 115.2 kbps (asynchronous).
Fiber:
TxD, RxD, CTS, RTS, DTR, DSR, RI,
DCD, GND
TxD+/-, RxD+/-, GND
Data+, Data-, GND
Data bits: 7, 8
Stop bits: 1, 2 (only "None" parity)
data communication mode
DIP 2 – Enables / disables RS-232
DIP 3 – Enables / disables RS-422/485 (4-wire)
DIP 4 – Enables / disables RS-485 (2-wire)
DIP 7 – Enables / disables termination (TMR)
24 AWG)
15 meters (RS-232)
2,000 meters (multimode)
20 km (singlemode)
30 km (long haul singlemode)
Introduction 4