Using Your Ultimate G As A Blower - Kirby G Series Owner's Manual

Canister Cleaner & Attachments
Canister Cleaner & Attachments
for those who apprecia te quality, reliability & performance
Using your Ultimate G as a Blower (continued)
BLOWER SET-UP (cont)
6
Place the large end of the Attachment Hose over the Air
Exhaust Port
Hose End with the Indicator Arrow on the Air Exhaust
Port and twist the Hose Connector to the right (clockwise) to
lock it in place.
If the Ultimate G will not operate, see page 51, question 2,
items 4 and 5. ❏
USING YOUR ULTIMATE G AS A BLOWER
Your Ultimate G may now be used as a blower.
By attaching the Inflator/Deflator Tool to the Attachment
Hose, you can inflate toys, air mattresses or any other
low-pressure inflatable item up to 1 p.s.i. (pounds per
square inch of air pressure). ➤
To deflate items, connect the Attachment Hose to the front of
the Ultimate G (see page 18 for details) and connect the
Inflator/Deflator Tool to the Attachment Hose. Then connect
the Bag Assembly to the Air Exhaust Port (see page 10).
You may now use your Ultimate G to deflate items.
NOTE: You can also use this set-up to clean tight areas such
as computer keyboards and audio/video equipment. ❏
o
. Line up the Indicator Arrow on the
1 9
23