Extension Tubes/Surface Nozzle - Kirby G Series Owner's Manual

Canister Cleaner & Attachments
Canister Cleaner & Attachments
for those who apprecia te quality, reliability & performance
Installing/Using the Attachments
INSTALLING ATTACHMENTS ON THE
ATTACHMENT HOSE
To attach tools to the hose, push lightly while twisting the
smaller end of the hose into the tool. ❏
ATTACHING THE SUCTION RELIEF
UPHOLSTERY PANEL
To attach the suction relief faceplate for drapes and delicate
upholstery, insert the lip on the front edge of the upholstery
tool under the two tabs on the front of the suction relief
faceplate as shown.
Push down the rear of the upholstery tool as shown to snap
the suction relief faceplate into place.
To remove the suction relief faceplate, reverse the
above procedure. ❏
EXTENSION TUBES
One or two Extension Tubes can be attached to the end of
the hose to extend your reach and efficiently use various
attachments. ❏
SURFACE NOZZLE
The Surface Nozzle may be used on bare floors or for sur-
face cleaning carpets and under low furniture.
Rubber wheels on the nozzle allow it to glide silently on the
surface of hard floors without scratching and vacuum with
maximum power. ❏
19