Bag Support Strap/Mini Em-Tor; Emptying The Mini Em-Tor; The Belt Lifter - Kirby G Series Owner's Manual

Getting Started
Getting Started
Bag Support Strap/Mini Em-Tor ® and Belt Lifter
CAUTION:
!
10 T h e K i r b y C o m p a n y
BAG SUPPORT STRAP
4
Check to make sure the Bag Support Strap
nected to the Top Adaptor
provides the support required for proper operation of
the Disposable Filter Bag.
If it is not connected, thread the strap through the small hole
of the Top Adaptor. Then place the hole in the strap over the
stud on the Top Adaptor.
Finally, insert the adaptor and new filter bag into the Outer
Permanent Bag
maximum performance.
NOTE: In order for the Filtration System to perform effectively,
use only Kirby ® Micron Magic ® HEPA Filtration Bags. If the
outside bag is torn or damaged, please replace immediately. ❏
EMPTYING THE MINI EM-TOR
The Mini Em-Tor
which can be emptied by removing the Mini Em-Tor.
1
To remove, grasp the Mini Em-Tor in the handhold
provided and rotate it away from the body of the
Ultimate G as far as it will go, then lift it off.
The top of the bag is released from the handle by pressing the Bag
Release Button
entire Bag Assembly, position the front opening of the Mini
Em-Tor over a newspaper and shake it to remove the particles. ➤
2
To replace the Mini Em-Tor, re-attach the entire Bag
Assembly by inserting the Bag Latch Tab
the bag into the slot under the Bag Release Button
Finally, line up the raised indicator arrow of the Mini Em-Tor
with the indicator arrow on the Air Exhaust Port
Mini Em-Tor towards the Ultimate G and lock it in place.
NOTE: The Mini Em-Tor must be securely locked in place
or the Ultimate G will not operate. ❏
USING THE BELT LIFTER
The Belt Lifter
l) To engage or disengage the Brush Roll. When the Brush Roll
is disengaged, the Ultimate G can be used as a straight suction
cleaner (page 14), and;
2) To allow removal of the Power Nozzle when converting
your Ultimate G for use with various attachments and
optional accessories.
To avoid damaging the belt, turn the Ultimate G OFF before
using the Belt Lifter. ➤
Do not pick up heavy objects, such as coins, screws, rocks or similar
objects. This may damage the fan.
o
5
o
and close the zipper completely for
1
o
is designed to collect large, heavy particles
6
o
. After removing the Mini Em-Tor and the
1 6
o
on your Ultimate G is used for two purposes:
2 0
o
is con-
4
. The Bag Support Strap
o
at the top of
2
o
1 6
o
. Rotate the
1 9
.