Philips ErgoLine D330 Manual page 57

Q0
Q1
Q2
R
Sr?
Sr=xxx
T
V0
V1
X0
X1
X3
Y
?
&E
&V<number
>
+++
S
OME OF THE REGISTER USED IN THE
,
USED NOT IMPLEMENTED OR NOT MENTIONED REGISTERS ARE ACCESSED THE VALUE
A
LL PROGRAMMED VALUES BETWEEN
S0
S1
S2
S3
S4
S5
S6
S7
Not used
Not used
Not used
Not used
Returns decimal value of register r
Program register r with xxx. Returns OK if x
does not exceed the maximum value for r,
otherwise ERROR is returned.
Not used
Numeric indication of result codes
Verbose indication of result codes
Suppress all result codes
Suppress result code 7
No suppression of result codes
Not used
Indicate the contents of the last read or
modified register
Change from AT mode to keyboard dialling
Set-up a voice call
Escape sequence (register S2). Change from
Data Transfer State to the Command Mode
without clearing the current connection.
Before and after the sequence, no data may
be transferred for 0.5 seconds. The sequence
itself must be received within 0.5 seconds
otherwise is invalid.
T 2-14. R
ABLE EGISTER
H
AYES MODEM ARE NOT APPLIED IN THE
.
RETURNED
0 255 (
AND
Value of S1 before a call is automatically
answered. The value 0 prevents automatic
answering of calls
Count of ring signals in 2 second steps until
the call is automatically answered. (The call
will be answered when the value of S0 is
reached.)
Character for escape sequence. Default is
ASCII 43 "+"
Not used character for Carriage Return.
Default is ASCII 13
Not used character for Line Feed. Default is
ASCII 10
Not used character for Back Space. Default is
ASCII 8
Not used Wait Time for Blind Dialling. Default is
ASCII 2
Not used Wait Time for Carrier After Dialling.
The maximum wait time until the connection
is established is 120 seconds. Default is ASCII
30
ErgoLine D330/D340
Customer Engineer Manual
E L D340. W
RGO INE
0
WILL ALWAYS BE
)
DECIMAL WILL BE ACCEPTED
HEN NOT
.
Page 2-37