Show Software Version; Display Test; Keyboard Test; Led Test - Philips ErgoLine D330 Manual

ErgoLine D330/D340
Customer Engineer Manual
Test codes and descriptions are as follows:
Show Software Version (Codes 1..... 6)
Code 1 : displays the version number of the terminal software EPROM.
Code 2 : displays the version number of the terminal key controller.
Code 3 : displays the version number of the key controller in DSS module 1
Code 4 : displays the version number of the key controller in DSS module 2
Code 5 : displays the version number of the key controller in DSS module 3
Code 6 : displays the version number of the V24 data module, where fitted.
Display Test (Code 11)
The display will show the complete dot matrix for approx. 3 seconds and then
clear.
Keyboard Test (Code 12)
Press each key in turn to display the key code on the LCD.
Refer to tables of key codes in the Function Key Downloading section.
LED Test : all LEDs on (Code 13
This test switches on all LEDs. The test code must then be re-entered to switch the
LEDs back off (toggle function)
WARNING: If the test code is not re-entered, and the set is returned to user
mode, the LEDs will remain on indefinitely.
LED Test : all LEDs flashing (Code 14
This test flashes all LEDs on and off simultaneously. The test is aborted on
cancelling.
Page 4-2
1
)
1
)