Philips ErgoLine D330 Manual page 41

M W
ESSAGE AITING
Messages are sent by the exchange.
A key must be programmed on the set for Message Waiting LED.
The LED can be programmed for a type 0, 1, or 2 message, meaning
respectively : LED on, winking or flashing.
The kind of message programmed for the different types, is system
dependent.
G R Y /N (S
ROUP ING ES O OFT
Default setting is group ring on (yes).
Local function code for group ring yes/no (facility number 42) may be
downloaded; the default setting is then overruled.
Extension user can not change the setting any more if downloading was
done with priority level 3.
C W I
ALL AITING NDICATION
Default setting is call waiting indication off (no).
Local function code for call waiting beep yes/no (facility number 44) may
be downloaded; the default setting is then overruled.
Extension user can not change the setting any more if downloading was
done with priority level 3.
Note: When the switch facility class mark 34 is set, the switch delivers a call
waiting tone. When the switch facility class mark 35 is set, the switch will only
deliver a tone for call waiting from an operator. When facility class mark 34
is set and call waiting indication as also set locally, call waiting is signalled
by the switch and by the set.
A A O /O
UTO NSWER FF N
Default setting is auto answer voice off.
Local function code for auto answer (facility number 38) may be down-
loaded; the default setting is then overruled.
Extension user can not change the setting any more if downloading was
done with priority level 3.
R O /O
INGER N FF
Default setting is ringer on.
Locally programmed in toggle list and can be programmed under a key.
S M O /O
TATUS ONITORING N
Default setting is monitoring on.
Locally programmed in toggle list and can be programmed under a key.
(
FUNCTION CODE
R ) (
ING FUNCTION CODE
Y /N (
ES O FUNCTION CODE
(
FUNCTION CODE
(
FUNCTION CODE
(
FF FUNCTION CODE
ErgoLine D330/D340
Customer Engineer Manual
39)
45)
51)
57)
58)
59)
Page 2-21