Installation; Unpacking; Ergoline D330; Ergoline D340 - Philips ErgoLine D330 Manual

I
NSTALLATION
This section provides the information required to complete the installation of the
ErgoLine D330 and ErgoLine D340 terminals.

Unpacking

Inspect the shipping carton for any shipping damage before unpacking.
Unpack the contents of the box carefully, ensuring that all items are removed
before disposing of the packaging. Each box contains the following:

ErgoLine D330

•
ErgoLine D330 main terminal unit
•
Handset
•
Line cord
•
Handset cord
•
PC interface (TAPI) software diskette (3.5 inch)
•
Function key labels (blank)
•
Quick Reference Guide

ErgoLine D340

•
ErgoLine D340 main terminal unit
•
Handset
•
Line cord
•
Handset cord
•
PC interface (TAPI) software diskette (3.5 inch)
•
Function key labels (blank)
•
Quick Reference Guide

Power Supply

The ErgoLine D330 can only be line powered.
The ErgoLine D340 can be line powered or mains powered. An external power
supply, which is available as an option, is required when the following options are
fitted:
•
V.24 data option
•
DSS (Direct Station Select) modules
When an external power supply is fitted, the ErgoLine D340 automatically detects
the power source and will perform a reset operation.
The external power supply requires 220-240V AC, 50/60Hz mains power.
The ErgoLine D330 and ErgoLine D340 are equipped with an EEPROM so
programmed information is not lost if the power is removed.
ErgoLine D330/D340
Customer Engineer Manual
Page 2-1