Philips ErgoLine D330 Manual page 44

ErgoLine D330/D340
Customer Engineer Manual
F
OOTPEDAL
Can only be switched on and off when the terminal is idle.
Function can be activated via the toggle list or through a function code.
S R
ECOND INGER
Can only be switched on and off when the terminal is idle.
Function can be activated via the toggle list or through a function code.
B I
USY NDICATION
Can only be switched on and off when the terminal is idle.
Function can be activated via the toggle list or through a function code.
M I
ANUAL BUSY NDICATION
Can only be switched on and off when the terminal is idle.
Function can be activated via the toggle list or through a function code.
D O
OOR PENER
Function can be only be activated via a function code.
X-
INPUT INSTEAD OF
Digital equipment which support the X-protocol can be enabled/disabled
in the idle and busy condition. This can be done via the toggle list or via a
function code.
H
ANDSET WITHOUT
Allows the use of the handset with the hookswitch disabled. A function key
with 'hookswitch' functionality has to be programmed, or a 'footpedal' has
to be connected to allow correct operation of the function.
Can be activated via the menu or via a function key. The operation mode
will be displayed when the terminal is idle.
H
EADSET
The hookswitch is disabled when this operation mode is active. A function
key with 'hookswitch' functionality has to be programmed, or a 'footpedal'
has to be connected to allow correct operation of the function.
Can be activated via the menu or via a function key. The operation mode
will be displayed when the terminal is idle.
K Y /N
EYCLICK ES
The Keyclick is only available for the ASCII keyboard. The function is only
available via the menu.
Default setting is keyclick off (no).
Page 2-24
(
FUNCTION CODE
(
FUNCTION CODE
M (
ICROPHONE FUNCTION CODE
H
OOKSWITCH
(
FUNCTION CODE
O
( 111)
FUNCTION CODE
( 112)
FUNCTION CODE
113)
114)
( 115)
FUNCTION CODE
116)
( 117)
FUNCTION CODE
118)
( )
NO FUNCTION CODE