Main Power And Energy Saver Key; How To Turn On The Main Power - Canon imageRUNNER Advance C5255 Basic Operation Manual

Main Power and Energy Saver Key

This section describes how to use the main power switch and the Energy Saver key.
Do not connect or disconnect the power cord with wet hands, as this may result in electrical
shock.

How to Turn ON the Main Power

Make sure that the power plug is fi rmly inserted into the power outlet and that the Security Key is in the ON positions (turn it to the right) if it is
inserted into the machine, and then turn ON the main power of the machine following the procedure below.
1. Open the main power switch cover.
2. Press the main power switch to the "I" side.
3. Close the main power switch cover.
• If you are using a login service, log in using the procedure for the login
service you are using.
• If the main power indicator on the control panel does not light even
though the main power switch is ON, be sure to check the breaker to see
if it is OFF.
• If you want to turn OFF the main power and then back ON again, wait for
at least 10 seconds after the main power indicator is turned OFF before
turning ON the main power.
12
Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012